- Allows bipod to attach to a KeyMod™ handguard
- Hex wrench included
- Specs: 2 ⅝” x 1 ⅛” 1.2 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Features: -
Features:- Allows left-right rotation
- Knurl knob to create a positive lock
- Ideal from target tracking
- Hex wrench included
- Specs: 2 ¾” x 1 ¼” x ¾” 5 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Sale!
(KeyMod Rotating adapter for KeyMod handguards) Includes: KMRA rotating adapter, any swivel model bipod, and the "S" Lock installed. You may choose any of the following bipods: HBRS, HBRMS, HBLS, HBLMS with the KMRA Rotating adapter and the "S" Lock (installed) -
Sale!(KeyMod Rotating adapter for KeyMod handguards) Includes: KMRA rotating adapter, any swivel model bipod, and the "S" Lock installed. You may choose any of the following bipods: HB25S, HB25CS with the KMRA Rotating adapter and the "S" Lock (installed)
-
- Material: Steel
- Color: Black
- 10/32 thread size
- Goes with 7/8" stud
- Made in the USA
-
Features:- For M1A and M16 rifles with both wood and polymer stocks
- Stud 3/8” / Thread 10/32
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Out of stock
Features:
- 4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
- 1X1 rib knit neck
- Shoulder to shoulder taping
- Tear-away label
HOW TO MEASURE:S M L XL XXL Chest 35-37 38-40 41-43 44-46 47-49 
CHEST WIDTH
Measure under the arm and around the fullest part of the chest with arms down, keeping tape horizontal. -
Features:
- 4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
- 1X1 rib knit neck
- Shoulder to shoulder taping
- Tear-away label
HOW TO MEASURE:S M L XL XXL Chest 35-37 38-40 41-43 44-46 47-49 CHEST WIDTH
Measure under the arm and around the fullest part of the chest with arms down, keeping tape horizontal. -
Features:
- Fabric: 100% cotton twill front panels, 100% polyester mesh mid and back panels
- Structure: Unstructured
- Profile: Low
- Closure: 7-position adjustable snap
CARE INSTRUCTIONS:
Machine wash cold with like colors. Remove promptly. Only non chlorine bleach when needed. Tumble dry low. Cool iron if needed. Do not dry clean. -
Features:- Allows bipod to attach to a M-Lok® handguard
- Hex wrench included
- Specs: 2 ⅝” x 1 ⅛” 1.1 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Features:- Allows left-right rotation
- Knurl knob to create a positive lock
- Hex wrench included
- Ideal for target tracking
- Specs: 2 ¾” x 1 ¼” x ¾” 4.9 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Sale!
(M-Lok rotating adapter for M-Lok handguards) Includes: MLRA rotating adapter, any swivel model bipods, and the "S" Lock installed. You may choose any of the following bipods: HBRS, HBRMS, HBLS, HBLMS with the MLRA Rotating adapter and the "S" Lock (installed) -
Sale!(M-Lok rotating adapter for M-Lok handguards) Includes: MLRA rotating adapter, any swivel model bipods, and the "S" Lock installed. You may choose any of the following bipods: HB25S, HB25CS with the MLRA Rotating adapter and the "S" Lock (installed)
-
-
- Allows mounting of stud on hollow plastic fore-ends
- Flange is 5/8 inch wide by 1 3/8 inch long.
- The shank is 5/16-inch diameter with 10-32 threaded hole.
- Stud and washer provided
- The purpose of the big-headed flange nut is to provide more support for the sling stud on thin walled fore-ends
- Made in the USA
-
- 5/8-inch round head flange nut
- Works well Ruger Model 77 Synthetic stocks
- Made in the USA
-
- Has radiused flange for mounting to wood or polymer fore-ends under gas tubes
- Flange has a ¾ Inch radius
- Made in the USA
-
- Fits Remington Semi-automatic rifles, Models No. 4, 74 and 7400
- The adapter consists of two-parts, the base and the fore-end screw
- Made in the USA
-
- Universal barrel adapter – Attaches to barrel not stock
- Fits barrels from .550 inch diameter to .812
- Requires 2 inches of uncluttered barrel for mounting
- Requires 6 inch or longer barrel
- Hinged mounting bracket allows bipod legs to fold backward
- Best application is on single shot pistols
- Not recommended for shoulder guns
- Mounting bipod on rifle barrels may affect accuracy
- Weight: 3 ounces
- Made in the USA
-
- Fits AR-15/M16 standard handguards without alteration
- Made to fit AR-15 round handguard
- Will not fit the older triangular type hand guard
- Package contains a perforated flange with a threaded shank, a rectangular washer, a Q.D. stud and a sling swivel
- Made in the USA
-
- For European size rails
- 3/8 inch across rail slots
- Slides into 3/8" rails and locks in place with a set screw
- Made in the USA
-
- For American Size Rails
- 5/16″ across rail slot
- Slides into 5/16" rails and locks into place with a set screw
- Made in the USA
-
- Rubber spacer may allow mounting on thin fore-ends and Schnable type fore-ends
- Reversable to change angle of bipod
- Made in the USA
-
- For Remington XP-100 synthetic stock
- Includes cylindrical nut, the quick detachable stud and the rubber spacer
- Requires drilling
- Made in the USA
-
- For flat bottom stocks
- Adapter holds bipod in proper alignment
- Fits bench rest type fore-ends from 2” to 4” in width
- Stud is required on fore-end
- Made in the USA
-
Features:- Allows bipod to attach to a Picatinny Rail
- Clamps on to Picatinny Rail with 2 hex screws
- Hex wrench included
- Specs: 2 ⅝” x 1 ¼” 2 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Features:- The RBA-1 allows rotation (right and left to follow your target)
- Quick detach adapter (attaches/detaches to Picatinny Rail with a push of a button)
- Polymer lever to create a positive lock at any position
- Ideal for target tracking
- Specs: 2 ¾” x 1 ⅜” x 1” 5.5 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Sale!
(RBA-1 Rotating adapter for Picatinny rails) Includes: RBA-1 rotating adapter, any swivel model bipod, and the "S" Lock installed. You may choose any of the following bipods: HBRS, HBRMS, HBLS, HBLMS with the RBA-1 Rotating adapter and the "S" Lock (installed) -
Sale!(RBA-1 Rotating adapter for Picatinny rails) Includes: RBA-1 rotating adapter, any swivel model bipod, and the "S" Lock installed. You may choose any of the following bipods: HB25S, HB25CS with the RBA-1 Rotating adapter and the "S" Lock (installed)
-
Features:- The RBA-2 allows rotation (right and left to follow your target)
- Clamps on to the Picatinny Rail with 2 hex bolts
- Polymer lever to create a positive lock at any position
- Ideal for target tracking
- Hex wrench included
- Specs: 2 ¾” x 1 ⅜” x 1” 5.5 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Sale!
RBA-2 Rotating adapter for Picatinny rails) Includes: RBA-2 rotating adapter, any swivel model bipods, and the "S" Lock installed. You may choose any of the following bipods: HBRS, HBRMS, HBLS, HBLMS with the RBA-2 Rotating adapter and the "S" Lock (Installed) -
Sale!RBA-2 Rotating adapter for Picatinny rails) Includes: RBA-2 rotating adapter, any swivel model bipods, and the "S" Lock installed. You may choose any of the following bipods: HB25S, HB25CS with the RBA-2 Rotating adapter and the "S" Lock (Installed)
-
Features:- The RBA-3 allows rotation (right and left to follow your target)
- Attaches to the sling swivel stud
- Polymer lever to create a positive lock at any position
- Ideal for target tracking
- Hex wrench included
- Specs: 2 ¾” x 1 ½” x 1 ⅛” 6.4 oz
- Made in the USA by MIM Mfg.
- Lifetime Guaranteed
-
Sale!
(RBA-3 Rotating adapter for sling swivel) Includes: RBA-3 rotating adapter, any swivel model bipods, and the "S" Lock installed. You may choose any of the following bipods: HBRS, HBRMS, HBLS, HBLMS with the RBA-3 Rotating adapter and the "S" Lock (Installed)
